Skip navigation

Category Archives: news

Looking for installation requirements or recommendations for the new 2011 line of products?  Well there’s a webcast for that!  I’ve summarized the video below, as well as added my own recommendation for some of the hardware.  Chances are though if you have a computer built in the last 2 years you should be pretty compatible.

The biggest changes for Revit Architecture, is that rendering is no longer limited to 4 cores, so you can go all out rendering if you have more than 4 cores available.  Also even more reliance on 64-bit processing, so you’re best bet is using the new Windows 7 64-bit operating system with your hardware allowing your computer to use the most memory available.

UPDATE:
Supported Graphics Card Hardware for Revit 2011:
http://www.autodesk.com/us/revit/revit_graphics_hardware_-_graphics_hardware_list_final.html

System requirements for installing Autodesk 2011 products:
http://www.youtube.com/watch?v=jc6vDZiRqLg

This includes:

  • AutoCAD 2011
  • Revit Architecture 2011
  • Inventor 2011

CPU (processor):

Requirement

  • Windows 7 or Vista processor: Intel® Pentium® 4 or AMD® Athlon dual-core processor, 3.0 GHz or higher with SSE2 technology
  • Windows XP: Intel Pentium 4 or AMD Athlon dual-core processor, 1.6 GHz or higher with SSE2 technology

Recommendation

  • Intel Core 2 Quad or Core i5 or i7,quad-core processor, 2.33Ghz or higher with SSE2 technology.
  • AMD Athlon or Phenom X3 or X4, triple-core, or quad-core processor, 2.6Ghz or higher with SSE2 technology.

RAM (physical memory):

Recommended

  • 32/64-bit AutoCAD = 2GB or more
  • 32-bit Inventor = 3GB for tooling
  • 64-bit Inventor = 6GB or more for complex models
  • 32-bit Revit Architecture = Use 64-bit for optimum performance
  • 64-bit Revit Architecture = 8GB or more
  • For all systems I’d recommend at least 4GB w/ 3GB switch enabled.  Keep in mind, memory is cheap, waiting on your computer is not!

Required

  • 32/64-bit AutoCAD = 2GB
  • 32/64-bit Inventor = 2GB
  • 32/64-bit Revit Architecture = 3GB

Graphics Card (video):

  • DirectX & Direct3D 9.0 or 10 capability
  • Shader Model 3.0 capability
  • 256MB or higher of video card memory (I’d recommend 512MB at minimum)

Hard Drive (virtual memory/page file/swap file):

Required free hard drive space:

  • 32/64-bit AutoCAD = 2GB min.
  • 32/64-bit Inventor = 2x memory installed
  • 32/64-bit Revit Architecture = 5GB min.

Operating Systems (AutoCAD, Inventor, Revit):

  • Windows 7 (32-bit & 64-bit)
  • Windows Vista (32-bit & 64-bit)
  • Windows XP (32-bit & 64-bit)
Advertisements

Autodesk will soon release Revit 2011 coming up in a couple weeks. After last years’ release of Revit 2010, I think people are ready for refinement.  For most, it took most of the year to get used to the new ribbon UI — and this year will bring that level of refinement that Revit needs.  Revit should finally become easier to use, more intuitive, and implement a lot of fixes for reported bugs & annoyances.

Out of the list, my favorites are the changes made to the ribbon UI. Many people will be glad to hear that the modify tab can be static now and the contextual tab will have the ability to return to the previous tab when done. Also they’ve included a QAT or Quick Access Toolbar that will give the user an option to “create their own” toolbar. These enhancements will greatly reduce confusion for new users.

Other essentials (read: wish list items) that were included in this release are backgrounds for renderings, a more realistic view for panning around in 3D, text enhancements, tagging items in linked models… a lot of these will help our workflow out immensely!

As I’m sure most of you are here for the details (and not my opinion), alas, here they are:

  • Improvements to DWG Export, increased visual fidelity, text treatment
  • Improvements 3D display quality & new types of views (ambient occlusion, realistic, consistent colors views)
  • View open time reduced
  • New Guide Grids (alignment grids) for sheets to help with view alignment
  • Align in 3D
  • New keyboard shortcut editing dialog box
  • New abilities around linked files, ability to tag an object in a linked file
  • Quicker file open times, now multi-threaded
  • Repeat last command (enter or right-click menu)
  • New Autodesk Material Library 2011
  • Materials displayed more consistently across views and platforms
  • New Placeholder sheets, ability to change placeholder to actual sheet
  • Ability to add/crop background image for rendering
  • Text enhancements
  • Find/Replace
  • Options for exporting text to CAD to maintain visual or functional fidelity
  • Box around text note
  • Distance between leader and text
  • Bullets & Numbering now possible
  • Additional dialog boxes now resizeable
  • Ability to create custom elevation tags
  • New sun path feature added
  • Ability to control temp dimension appearance (without editing Revit.ini)
  • Revit MEP copy/monitor fixtures
  • Ability to disable the auto-switch to contextual tab when object is selected so you can keep current tab active.
  • Ability to return to previous tab after action completion
  • New Properties Palette
  • Modify tab is both static & contextual now, remains in same location
  • New Customizable QAT (Quick-Access Toolbar) to add your most-used tools
  • New workset & design option controls added to the bottom-right of Revit window
  • Workset visiblity enhancements

That’s it for now! As always bookmark revit2011.info for the latest on Revit 2011.

Well just like previous years, it looks like early-mid April seems to be the rollout of Autodesk’s new products.  Below is this years rollout schedule for the AEC products, I’ve included them below:

Architecture, Engineering & Construction Products   Release Date
AutoCAD® Architecture 2011   March 25
AutoCAD® MEP 2011   March 25
AutoCAD® Map 3D 2011   March 29
Autodesk® Navisworks® Freedom 2011   April 2
Autodesk® Navisworks® Manage 2011   April 2
Autodesk® Navisworks® Simulate 2011   April 2
AutoCAD® Revit® Architecture Suite 2011   April 8
AutoCAD® Revit® MEP Suite 2011   April 8
AutoCAD® Revit® Structure Suite 2011   April 8
AutoCAD® Structural Detailing 2011   April 8
Autodesk® Revit® Structure 2011   April 8
Autodesk® Revit® Architecture 2011   April 8
Autodesk® Robot™ Structural Analysis 2011   April 12
Autodesk® Buzzsaw®   April 17
AutoCAD® Civil 3D® 2011   April 20
Autodesk® Ecotect® Analysis   April 20
Autodesk® Constructware®   April 24
     

With today’s press release announcing the 2011 software suite of products, they also updated their 2011 feature list.  Here are some of the new features we’ll see in Revit 2011:

Download the Autodesk Press Packet

Also the brochures for Revit Architecture 2011 & Revit Structure 2011 & Revit MEP 2011:
http://images.autodesk.com/adsk/files/autodesk_revit_architecture_2011_brochure.pdf
http://images.autodesk.com/adsk/files/revit_structure_2011_overview_brochure_us.pdf
http://images.autodesk.com/adsk/files/autodesk_revit_mep_overview_brochure_us.pdf

Revit Architecture 2011 Revit Structure 2011

User Interface Improvements

  • A modeless properties palette allows the user to change the properties of an element during placement or modification.
  • Contextual tab improvements reduce the number of tab switches and provide consistent tool locations.
  • Users now have the ability to adjust the order of tools on the Quick Access toolbar.

User Interface Improvements

Adaptive Components

Adaptive component functionality is designed for situations when components need to flexibly adapt to unique contextual conditions. Adaptive points are created by modifying reference points. The geometry drawn by snapping to these adaptive points results in an adaptive component.

Adaptive Components

Form Editing

A form can be edited in sketch mode by modifying the curves from which it was created. A form can also be dissolved back to the curves from which it was created. Once a form has been dissolved, its profile curves and path (when applicable) remain. These curves and path can be edited to create a new form.

Form Editing

Large Team Workflow

Improve your ability to work with projects containing linked files with the capability to apply view filters, tag elements, and control visibility of worksets.

Large Team Workflow

Text Improvements

Improvements to text tools enable you to:

  • Adjust the location of the leader relative to the text block
  • Format text with bullets and numbering
  • Modify text using the Find & Replace Text tool

Text Improvements

New Structural Tools

Several structural tools, previously available only in Autodesk® Revit® Structure software, are now available to Autodesk Revit Architecture users.

These tools include:

  • Curved Beams
  • Metal Decking
  • Slanted Structural Columns
  • Trusses
  • Beam Coping tool
  • Beam System Tags

New Structural Tools

Enhanced Visualization

Autodesk Revit Architecture now provides the ability to display materials and ambient lighting in editable views.

Enhanced Visualization

Keyboard Shortcuts

Autodesk Revit Architecture now provides a new interface for managing keyboard shortcuts for Revit Tools:

  • Add or remove keyboard shortcuts and assign multiple shortcuts for each Revit Tool.
  • Import keyboard shortcuts from another user.
  • Export keyboard shortcuts to share them with other users, or to a spreadsheet program where you can sort, organize, and print a list of shortcuts for quick reference.

Keyboard Shortcuts

Custom Elevation Tags

Define the appearance of view tags used for elevations. Elevation tags can now have any shape and any number of arrows pointing in nonorthogonal directions relative to the tag body.

Custom Elevation Tags

Background Images in Rendering

Autodesk Revit Architecture now provides the ability to display images in the background of rendered views.

Background Images in Renderings

Sheet Improvements

Improvements to sheets enable you to:

  • List sheets on the drawing list that are not in the project, such as consultant drawings
  • Consistently align views on sheets

Sheet Improvements

Convert Line Types

The convert lines tool converts existing model lines, detail lines, and symbolic lines into the preferred line type.

Convert Line Types

Autodesk Revit Architecture 2011
Autodesk® Revit® Architecture 2011 software helps architects and designers work naturally, design freely and deliver projects efficiently. Purpose-built for Building Information Modeling (BIM), Revit Architecture helps you explore design concepts and forms, and better maintain your design data through documentation and construction. With parametric change technology, any change you make is automatically updated throughout your model, keeping your design and documentation coordinated and more reliable. Share essential BIM data with your partners for a more collaborative, integrated building design process. Support a more efficient design process that enables improved sustainable design analysis, clash detection, construction planning and material fabrication.

What’s New

Key Features Common to all Revit Platform Software Autodesk® Revit® Architecture 2011, Autodesk® Revit® MEP 2011 and Autodesk® Revit® Structure 2011 software share a common set of key enhancements for improved design functionality and workflow to help design teams accelerate better design with tools that promote productivity and support sustainable design and analysis. See the Autodesk® Revit® Platform Enhancements for 2011 backgrounder for information on the platform enhancements.

Enhancements specific to Revit Architecture 2011 include:
Form Editing
  • Sketch editing for conceptual masses in Revit Architecture 2011 has been improved with the ability to edit individual profiles of any type of form without having to delete the form first, similar to “sketch mode” but even more accessible.
  • The Dissolve Form command removes the surfaces from a form, leaving the valuable defining profiles, curves and points.
  • In the past, only voids could be used as cutting elements for Boolean operations, and it was difficult to access them again for further transformations. Now solids can be used to cut other solids, so that when the cut is executed, geometry from both forms remains visible.
Surface Rationalization
  • The ability to rationalize surfaces has been enhanced. Surfaces can now be split by levels, reference planes and model lines.
  • Now, divided surface patterns can be made up of any combination of UV grids and intersects created by these new elements. Adaptive
Components

The adaptive component is a generalized implementation of the pattern-based curtain panel family, which was introduced with the 2010 release of Autodesk Revit Architecture. It is designed to handle cases where components need to flexibly adapt to many unique contextual conditions. The adaptive component can be used to simply fill in the empty edge panels on a divided surface or for more complex modeling or framing applications.
Structural Tools
Several features formerly available only in Autodesk Revit Structure software are now available in Autodesk Revit Architecture, such as the ability to create:
  • Curved beams
  • Slanted columns
  • Beam copings
  • Trusses
  • Metal deck profiles, and more
Rendering Enhancements:
  • Background Images Revit Architecture now provides the ability to display images in the background of rendered views.
  • Procedural Textures Create custom procedural textures based on patterns such as checker, gradient, wood or tiles.
  • New Autodesk Material Library More smoothly exchange material data between Autodesk applications with the new Autodesk Material Library. Materials can be exchanged with certain other supporting Autodesk applications (AutoCAD®, Autodesk® Inventor®, Autodesk Revit MEP and Autodesk Revit Structure software) in a true one-to-one mapping — helping create a consistent definition and rendered look and minimize the need to rework materials after data import. Note: The new Material Library in Revit Architecture 2011 will only export materials, lights, or environments to 3ds Max/3ds Max Design 2011.
  • Removal of Four-Core Rendering Limit Rendering in Revit-based products is no longer limited to the use of four cores on multiprocessor computers. Revit-based products can now take advantage of as many cores as are available on your computer.
Access to Autodesk® Green Building Studio® Web-Based Services (Available with Subscription to Revit Architecture)
  • More smoothly extend BIM workflows to include sustainable analysis. With more than 1.6 million virtual weather locations across the globe, the climate information used in analyses can be more local, accurate and current.
  • By using the power of cloud computing, Green Building Studio can generate analyses in a matter of minutes, thus helping architects and designers to iterate through multiple design options earlier and more often.
  • For new buildings projects, whole building energy analysis can help predict more accurate building operation costs before construction. For renovation and retrofit projects, the software helps users to make the most efficient design choices.

Don’t forget to bookmark: http://www.revit2011.info

Autodesk Unveils 2011 Software Portfolio for Building Design, Infrastructure and Construction Industries

http://news.autodesk.com/news/autodesk/20100325005433/en/Autodesk-Unveils-2011-Software-Portfolio-Building-Design

To view the full archived Autodesk webcast from today click here.  In the webinar they outline a lot of the new 2011 products.

Updates for Key Product Lines Promote Building Information Modeling and Multidisciplinary Collaboration for New and Renovation Projects

SAN RAFAEL, Calif.–(BUSINESS WIRE)–Autodesk, Inc. (NASDAQ:ADSK), a world leader in 2D and 3D design, engineering and entertainment software, announced new versions of its software for the building, infrastructure and construction industries. The updated portfolio is designed to help increase industry adoption of the Building Information Modeling (BIM) process, facilitate multidisciplinary collaboration and address new and renovation projects.

“Our new 2011 software helps support that goal by capitalizing on the enormous benefits of Building Information Modeling, and facilitating multidisciplinary collaboration from start to finish for everything from new construction and renovations on residential and business projects to large-scale infrastructure and government projects.”

“The building design, construction and infrastructure industries must improve productivity, while at the same time completing complex projects on time and at, or under budget,” said Jay Bhatt, senior vice president of AEC Industry Solutions. “Our new 2011 software helps support that goal by capitalizing on the enormous benefits of Building Information Modeling, and facilitating multidisciplinary collaboration from start to finish for everything from new construction and renovations on residential and business projects to large-scale infrastructure and government projects.”

2011 Portfolio for Building Design and Construction

Autodesk’s 2011 software for new construction and existing building projects supports the Building Information Modeling process to help architects, designers and engineers more easily create and profit from digital design data and better communication across extended project teams. Updated software includes:

  • Autodesk Revit Architecture 2011 software — Autodesk Revit Architecture helps architects and designers work naturally, design freely, and deliver projects efficiently. Purpose-built for building information modeling (BIM), Revit Architecture helps explore design concepts and forms, and better maintain design data through documentation and construction. With parametric change technology, any change made is automatically updated throughout your model, keeping design and documentation coordinated and more reliable. Key new features include:
    • Large team workflow
    • Enhanced visualization
    • Enhanced documentation
  • Autodesk Revit Structure 2011 software — Autodesk Revit Structure is the purpose-built building information modeling (BIM) solution for structural engineering firms, providing tools for structural design and analysis. Revit Structure integrates a multimaterial physical model and an independently editable analytical model for more efficient structural analysis while providing bidirectional links to popular structural analysis software. Key new features include:
    • Framing enhancements (slanted columns, beam systems, trusses and connection symbols)
    • Reinforcement and concrete cleanup enhancements
    • Analytical model enhancements
  • Autodesk Revit MEP 2011 software — Autodesk Revit MEP building information modeling (BIM) software helps mechanical, electrical, and plumbing (MEP) engineers, designers, and drafters gain the competitive advantage of BIM by analyzing and optimizing building systems designs before they are built. Autodesk Revit MEP helps design teams accelerate better design with tools that promote productivity and support sustainable design and analysis. Key new features include:
    • Cable tray and conduit modeling
    • Panel schedules and demand factors
    • MEP fixture management

To help facilitate the BIM process, while at the same time protecting investment in legacy software, training and design data investments, the 2011 portfolio includes:

Enhancements for AutoCAD Architecture 2011 and AutoCAD MEP 2011 include:

  • AutoCAD Architecture 2011 — efficient drafting and documentation with an intuitive environment and purpose-built tools for architects. Key new features include:
    • New geometric and dimensional constraints
    • New renovation tools to help accelerate design and production
    • Improved wall cleanups with new intelligent Cleanup command
  • AutoCAD MEP 2011 — version of AutoCAD software for mechanical, electrical and plumbing (MEP) designers and drafters that provides greater drafting productivity. Key new features include:
    • MvPart view blocks (create and store AutoCAD block names, edit display)
    • Parallel conduit routing
    • Sloped piping

To facilitate multi-discipline collaboration the 2011 building and construction software portfolio includes:

  • Autodesk Navisworks 2011 — software (including Autodesk Navisworks Manage 2011, Autodesk Navisworks Simulate 2011 and Autodesk Navisworks Freedom 2011 software) enables design and construction professionals to unite project contributions into a synchronized model for whole-project review, simulation and analysis. Key enhancements for the Navisworks 2011 family of software include:
    • Restructured and simplified User Interface (applies to Navisworks Manage, Simulate and Freedom)
    • Enhanced sectioning Tools (applies to Navisworks Manage and Simulate)
    • New Primavera link and Gantt view (applies to Navisworks Manage and Simulate)
  • Autodesk Buzzsaw 2011 — Autodesk Buzzsaw is a leading software as a service (SaaS) delivered document, data, and design management solution for centralizing and more securely exchanging project information for distributed teams (across stakeholders, geographies and companies). Fully integrated into the portfolio of Autodesk design solutions, Autodesk Buzzsaw 2011 now includes the Buzzsaw Sync feature. With Buzzsaw Sync users can:
    • Automatically synchronize files from the desktop to the Buzzsaw cloud without interrupting users’ workflow
    • Easily centralize multi-discipline models for importing into Autodesk Navisworks
    • Leverage Buzzsaw permissions to more securely synchronize, share and access information

To facilitate design visualization and creative storytelling the 2011 portfolio includes:

  • Autodesk 3ds Max Design 2011 — Autodesk 3ds Max Design 2011 software offers compelling new techniques for bringing designs to life by aggregating data, iterating ideas, and presenting the results. Key new features include:
    • Quicksilver, an innovative new hardware renderer
    • FBX File Link with Revit Architecture
    • Viewport display of 3ds Max Design materials

2011 Portfolio for Infrastructure

Autodesk’s 2011 software for road, highway and utilities projects includes:

  • AutoCAD Civil 3D 2011 — AutoCAD Civil 3D software, the building information modeling (BIM) solution for civil engineering, helps teams deliver higher-quality transportation, land development, and environmental projects faster. Its model-based approach helps keep project information coordinated while delivering higher-quality documentation and visualizations. AutoCAD Civil 3D helps users gain the competitive advantage of BIM to deliver more innovative project solutions. Key new features include:
    • Scalability and performance improvements, as well as an optimized 64-bit version of Civil 3D
    • Tools to better manage the creation and editing of corridors
    • Enhanced superelevation functionality that provides a dynamic link to the alignment and flexible editing options
  • AutoCAD Map 3D 2011 — AutoCAD Map 3D software can provide direct access to data needed for infrastructure planning, design, and management activities. AutoCAD Map 3D helps professionals working on transportation, land development, water, and power projects to more easily create, manage, and analyze design, GIS, and asset data so they can achieve better designs, enhanced productivity, and better data quality. Key new features include:
    • New point cloud tools
    • New and enhanced data support
    • Enhanced workflow capabilities

Availability

Product availability will vary by country. Details and purchasing options are available at http://www.autodesk.com/purchaseoptions.

About BIM

BIM is an integrated process for exploring a project’s key physical and functional characteristics digitally before it’s built, helping to deliver projects faster and more economically, while minimizing environmental impact. Coordinated, consistent information is used throughout the process to design innovative projects; better visualize and simulate real-world appearance, performance and cost; and create more accurate documentation.

About Autodesk

Autodesk, Inc., is a world leader in 2D and 3D design, engineering and entertainment software for the manufacturing, building and construction, and media and entertainment markets. Since its introduction of AutoCAD software in 1982, Autodesk continues to develop the broadest portfolio of state-of-the-art software to help customers experience their ideas digitally before they are built. Fortune 100 companies — as well as the last 15 Academy Award winners for Best Visual Effects — use Autodesk software tools to design, visualize and simulate their ideas to save time and money, enhance quality and foster innovation for competitive advantage. For additional information about Autodesk, visit www.autodesk.com.

Autodesk, AutoCAD, Buzzsaw, Civil 3D, Navisworks, Revit and 3ds Max are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. Academy Award is a registered trademark of the Academy of Motion Pictures Arts and Sciences. All other brand names, product names or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document.

© 2010 Autodesk, Inc. All rights reserved.

It’s official — Motorola Droid’s Android 2.1 update to be rolled out OTA starting Thursday

The highlights:

  • New Weather & News Applications & Widgets
  • New Gallery Application now with 3D and integration of Picasa Web Albums
  • Google Maps update to include Pinch-to-Zoom
  • Google Maps Navigation gets a dark-theme for better visibility at night.
  • Live Wallpapers

Here’s the screenshot (source:AndroidCentral):

Well here’s the official Motorola document to prove it:

http://support.vzw.com/information/droid_upgrade.html

From the update PDF:

http://support.vzw.com/pdf/system_update/moto_droid.pdf

Enjoy improved performance with these Android™ enhancements. Verizon Wireless is pleased to announce new software updates for your Droid by Motorola smartphone.

The Droid by Motorola software version AP: ESE53/BP: C_01.3E.03P update includes numerous enhancements and improvements.

Enhancements

  • Pinch-to-zoom is now available when using the browser, Gallery, and Google Maps.
  • New Weather and News application plus widget.
    • The Weather and News app pulls the information you want from the
      Web and brings it to your fingertips. You get weekly and hourly
      weather forecasts based on your location, and news headlines.
  • New support for voice-to-text entry.
    • Whenever a text-entry box appears, simply tap the microphone icon on the virtual keyboard and speak.
  • New Gallery application with 3D layout. View and share photos taken with your phone and images from your online Picasa Web albums.
  • Live Wallpapers offer richer animated, interactive backgrounds on the
    home screen. Access them with a long press anywhere on the home screen. Tap Wallpapers, then Live Wallpapers.

Improvements

  • Free Yahoo!® Mail is now supported—simply sign in with your Yahoo! email address and password.
  • Google Maps update
    • Personalized suggestions and synchronized starring with
      desktop maps.google.com.

      • Starred items are stored and synced automatically between Google
        Maps on your device and maps.google.com on your computer, making it easy to search for places you’ve searched for before.
    • New night mode in Google Maps Navigation automatically changes the screen at night for easier viewing.
  • Improved pattern-lock functionality.
  • Improved handset audio when disconnecting a wired headset.
  • Email accounts no longer need to be re-entered after an over-the-air update.

Internet Explorer 9 Preview Download Available

You can download the preview via the website:

http://www.ietestdrive.com/

A couple things of note:

  • This is not a full fledged browser, no address bar, no tabs, no back button, it does however include everything the web developer needs to preview — the rendering engine, the Javascript engine, hardware acceleration tools and the developer tools.
  • IE9 will NOT be supported on Windows XP, mostly because of the extensive hardware acceleration features like Direct2D and DirectWrite.
  • As of now scores 55/100 on Acid3 test.
  • As of now the JS engine is faster than Firefox 3.6, but not as fast as the newly released Opera 10.5

internet explorer 9 preview

According to AndroLib.com the Android Market hit 30,000 apps on February 24th, 2010. TechCrunch reported the 20,000 app milestone on December 15th, 2009 and predicted the Android Market would hit 50,000 apps by Q2 2010, I’d say that’s about right… well IN Q2 of 2010. Probably more like mid-May.

Anyhow, here are my calculations for when we can predict the next 40,000 app milestone:
12/15/2009 – 20,000 apps
2/24/2010 – 30,000 apps
In the last 2 weeks – +3,000 apps

At this rate, it should hit 40,000 on or around April 14th, this is of course assuming the rate stays the same and doesn’t increase. We’ll see. Have your own prediction? Post it in the comments.

UPDATE:  Well it seems no one could have predicted the kind of March Android Marketplace had, with over 9,000 new apps, it reached 40,000 in a mere 3 weeks, at or around March 25th.  Impressive!

UPDATE: Release date set for April 8th

Well this time last year the details of Autodesk Revit 2010 were released along with webcasts showing off all the new features. Yet here we are still with no details (well publicly available) about Revit 2011 and the released date less than 2 months away.

Never fear, once Autodesk releases their press-release you’ll see the final list of new and improved features for Revit 2011. So bookmark this site and I promise you I’ll publish the feature post as soon as the news becomes public. Let’s just hope they don’t pull an “Apple” and hold all the details until the release date. Now that would be traumatic.

Maybe Autodesk is just waiting for the Olympics to end, so they can garner more press 🙂

Anyhow, if you have any public information or mere speculations on what’s new in Revit 2011, please feel free to comment below.

More information from Autodesk on what’s new in Revit Architecture 2010:

Autodesk® Revit® Architecture 2010

Autodesk Revit Architecture 2010 software works the way architects and designers think, allowing users to work more naturally, design freely and deliver more efficiently. Purpose-built for building information modeling (BIM), Autodesk Revit Architecture helps designers explore early design concepts and forms, and more accurately maintain their vision through design, documentation and construction. Use the essential BIM data that

Autodesk Revit Architecture provides to support sustainable design, clash detection, construction planning and fabrication. Share the model to work collaboratively with engineers, contractors and owners in an integrated process. And with parametric change technology, any change made is automatically updated throughout the project, keeping design and documentation better coordinated and more reliable.

What’s New

Conceptual Design Enhancements
– New and innovative conceptual design features provide easier-to-use tools for freeform modeling and parametric design, and the ability to support the earliest design analyses.
– Sketch freely, create 3D forms more quickly and manipulate forms interactively.
– Prepare models for fabrication and construction with built-in tools for conception and clarification of complex forms. New tools to divide, pattern and panelize designs make forms more buildable.
– Autodesk Revit Architecture automatically builds a parametric framework around your most complex forms as you continue to design, offering you greater levels of creative control, accuracy and flexibility.
– Users can now take designs from concept model all the way to construction
documents within one intuitive environment and user interface.

Improved User Interface
– New streamlined user interface helps users find favorite tools and commands faster, locate lesser-used tools more efficiently and discover new features more easily.
– Customizable Quick Access Toolbar allows one-click access to a user’s favorite and most frequently used tools.
– The ribbon feature is organized around the way designers work, enabling users to find the tools to accomplish tasks without searching all over the user interface.
– Consistent user interfaces between most Autodesk software applications allows users to move between programs more smoothly.

Performance and Interoperability
– New native 64-bit support enhances the software’s ability to handle large projects and improve performance and stability for memory-intensive tasks such as rendering, printing, model upgrading and file importing and exporting.
– Expanded API (application programming interface) support.
– Export to AutoCAD® Civil 3D® software and import from Autodesk® Inventor® , while preserving parametric data.
– gbXML (green building XML) improvements allow users to help streamline the
collaboration process with external analysis applications.